sait

Cerabar S Profibus Device Configuration

Manufacturer View

• Operating Menu
  • Settings
    • Basic Setup
      • Measuring Mode -Pressure
      • Press. Eng. Unit - psi
  • Transmitter Info
    • Transmitter Data
      • Tag Descriptor - PIT-xxx

Resetting the Device

Manufacturer View

• Operating Menu
  • Operation
    • Insert Pin No
      • 33333 (User Reset)
      • 1 (Total Reset)

Hardware addressing

1. Unscrew front cover & remove display
2. Set DIP switch 8 (SW/HW) to “Off” (Down) = Hardware Addressing
3. Configure the address with DIP switches 1 to 7.
4. You have to wait 10 seconds for a change in address to take effect. The device is restarted.

DIP-Switch	1	2	3	4	5	6	7
Binary Weighting	1	2	4	8	16	32	64

Example

Dip-Switches 3 & 4 “On” (Up) remaining Dip-Switches “OFF”(Down)

Address = 4+8 = 12