Prowirl 73 Profibus Device Configuration
Hardware addressing
- Switch off power supply
- Unscrew front cover & remove display
- Set DIP switch 10 (SW/HW) to “On” (Up) = Hardware Addressing
- Configure the address with DIP switches 1 to 7.
- You have to wait 10 seconds for a change in address to take effect. The device is restarted.
| DIP-Switch |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
| Binary Weighting |
1 |
2 |
4 |
8 |
16 |
32 |
64 |
Example
Dip-Switches 3 & 4 “On” (Up) remaining Dip-Switches “OFF”(Down)
Address = 4+8 = 12